Find a Service Center
Boston Gear
F7726-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833609
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Output Configuration | Left Output |
| Fan Cooled | No |
| Media Mapping Style | F |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Speed | 175 rpm |
| Output Shaft | Solid |
| Worm Position | Universal |
| Ratio | 10:1 |
| Media Mapping Output | G |
| Rated Efficiency | 95% |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Motor Application | General Purpose |
| HP @ RPM | 3 hp @ 1800 rpm |
| Standard | AGMA Service Class II |
| Output Bore Shaft Dia. | 1.125 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Torque Out @ 1750 rpm | 1345 in lb |
| Housing Material | Cast Iron |
| Input Motor HP | 3 |
| Torque Out @ 1150 rpm | 1390 in lb |
| Input Configuration | C-Face Quilled |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Series | 700 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Shaft Assembly Code | G |
| Use With | 726 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Reduction Type | Single |
| Box Length | 7 3/8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Washdown Duty | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Motor HP | 2 hp |
| Style | Right Angle |
| Center Distance Code | 726 |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Frame | 140TC, 180C |
| Input Power Rating | 3.94 hp, 2.938 kW |
| Material | Cast Iron, Standard Paint |
| Frame Size | 140TC, 180C |
| Output Torque | 1345 lb-in |
| Output Shaft Projection | Solid Left Output |
| Motor Frame Size | B7140TC180C |
| Center Distance | 2.625 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Family Name | F |
| Box Height | 8 in |
| Lubrication | None |
| Box Width | 5.9 in |
| Bore Code | B7 |
| Weight | 41.1 LB |
| EAN or UPC | 781711520178 |
