Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Brake Type | Hydraulic |
| Paint Code | A |
| Seal Options | Standard |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 353 rpm @ 15 gal/min |
| Flow Rate | 57 lpm |
| Seal Material | Buna-N |
| Pilot Diameter | 1.75 in |
| Mount Type | 4 Bolt |
| Motor Type | Spool Valve |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Front Seal Kit If Available | 60540-000 |
| Displacement (in³/rev) | 9.7 |
| Rotation | Standard Rotation |
| Recommended System Working Temperature [Max] | 180 °F |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Port Code | A |
| Displacement | 159 cm3/Rev |
| Pressure [Max] | 1650 psi |
| Case Drain | None |
| Mounting Holes | 3/8-16 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Duty | Standard-Duty |
| Torque | 233 Nm |
| Recommended System Working Temperature [Min] | -30 °F |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Size | 7/8-14 |
| RPM [Max] | 353 rpm |
| RPM [Min] | 353 rpm |
| Output Shaft Code | 01 |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Assembly Code | 0 |
| Splines | 0 |
| Design Code | 9 |
| Mounting Type Code | B |
| Port Size & Location | SAE-10 Side |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 2062.22 in lb |
| Paint | Primer Low Gloss Black |
| Port Location | Side Port |
| Flange Orientation | Standard |
| Flow [Max] | 15 gal/min |
| Output Shaft Type | Straight |
| Series | H Series |
| Intermittent Pressure [Max] | 155 bar |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Case Drain Code | 0 |
| Special Features Hardware Code | 00 |
| Weight | 12.1 LB |
