Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Paint/Packaging | Low Gloss Black, Individual Box |
| Flow [Max] | 15 gal/min |
| Case Drain | None |
| Displacement (in³/rev) | 22.6 |
| Seal Material | Buna-N |
| Design Code | 9 |
| Recommended System Working Temperature [Max] | 180 °F |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Flange Orientation | Standard |
| Flow Rate | 57 lpm |
| Mounting Holes | 3/8-16 |
| Paint | Primer Low Gloss Black |
| Pressure [Max] | 1250 psi |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Torque | 407 Nm |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features Assembly Code | 0 |
| Pilot Diameter | 1.75 in |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Port Code | A |
| Front Seal Kit If Available | 60540-000 |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Duty | Standard-Duty |
| Intermittent Pressure [Max] | 103 bar |
| RPM [Max] | 152 rpm |
| Motor Element | Gerotor |
| Output Shaft Type | Straight |
| Port Size & Location | SAE-10 Side |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Mounting Type Code | B |
| Rotation | Standard Rotation |
| Output Shaft Code | 01 |
| Port Size | 7/8-14 |
| Corrosion Resistant | No |
| RPM [Min] | 152 rpm |
| Displacement | 370 cm3/Rev |
| Recommended System Working Temperature [Min] | -30 °F |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Series | H Series |
| Port Type | SAE O-Ring |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Brake Type | Hydraulic |
| Inlet Pressure [Max] | 2500 psi |
| Seal Options | Standard |
| Splines | 0 |
| Weight | 14.36 LB |
