Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.852 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRWH1 |
| Temperature Range [Min] | -40 °F |
| Spring Material | Carbon Steel |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Case Design | Metal Case, Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Bore Sealant | Bore Tite |
| Overall Width | 0.313 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Case Material | Steel |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.852 in |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Seal Width | 0.313 in |
| Lip Type | Single Lip |
| Spring Type | Garter |
| Shaft Dia. | 1.125 in |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Weight | 0.102 LB |
| EAN or UPC | 85311009676 |
