Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.852 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRWH1 |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Seal Width | 0.313 in |
| Design | CRWH1 |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Overall Width | 0.313 in |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Min] | -40 °F |
| Lip Type | Single Lip |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Case Material | Steel |
| Solid | Yes |
| Spring Type | Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.852 in |
| Seal Application | General Purpose |
| Shaft Dia. | 1.125 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.102 LB |
| EAN or UPC | 85311009676 |
