Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Construction | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.25 in |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 1.188 in |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 1.752 in |
| Solid | Yes |
| Seal Width | 0.25 in |
| Inch/Metric | Inch |
| Design | CRW1 |
| Weight | 0.031 LB |
| EAN or UPC | 85311010511 |
