Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 225 °F |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Inch/Metric | Inch |
| Design | CRW1 |
| Solid | Yes |
| Pressure | 10 psi |
| Housing Bore Dia. | 1.752 in |
| Overall Width | 0.25 in |
| Construction | CRW1 |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Installation | Housing Press Fit |
| Family Name | Single Lip With Spring Shaft Seal |
| Shaft Dia. | 1.188 in |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel Garter |
| Seal Width | 0.25 in |
| Case Design | Metal Case |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.031 LB |
| EAN or UPC | 85311010511 |
