Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Temperature Range [Min] | -65 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Seal Type | Oil |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Spring Type | Garter |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case |
| Lubricant | Oil or Grease |
| Overall Width | 0.313 in |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Housing Bore Dia. | 2.502 in |
| Solid | Yes |
| Shaft Dia. | 1.438 in |
| Seal Width | 0.313 in |
| Spring Material | Carbon Steel |
| Weight | 0.082 LB |
| EAN or UPC | 85311014144 |
