Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Type | Garter |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Lip Style | Internal |
| Seal Width | 0.313 in |
| Case Construction | Steel Case w/o Inner Case |
| Spring Material | Carbon Steel |
| Temperature Range [Min] | -65 °F |
| Lubricant | Oil or Grease |
| Construction | CRW1 |
| Shaft Dia. | 1.438 in |
| Housing Bore Dia. | 2.502 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Bore Sealant | Bore Tite |
| Temperature Range [Max] | 225 °F |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.313 in |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Case Material | Steel |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Weight | 0.082 LB |
| EAN or UPC | 85311014144 |
