Find a Service Center
Alternate Products
- 1.688 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 2.502 in |
| Operating Temperature [Max] | 210 °F |
| Temperature Range [Min] | -65 °F |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Design | CRW1 |
| Surface Speed [Nom] | 1,990 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Shaft Dia. | 1.688 in |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.313 in |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Operating Temperature [Min] | -40 °F |
| Seal Width | 0.313 in |
| Weight | 0.053 LB |
| EAN or UPC | 85311017596 |
