- 1.688 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Shaft Dia. | 1.688 in |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Construction | CRW1 |
| Solid | Yes |
| Housing Bore Dia. | 2.502 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Width | 0.313 in |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -65 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Style | Internal |
| Overall Width | 0.313 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 1,990 ft/min |
| Operating Temperature [Min] | -40 °F |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Weight | 0.053 LB |
| EAN or UPC | 85311017596 |

