Find a Service Center
- 2.375 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 2.375 in |
| Design | CRW1 |
| Operating Temperature [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Case Design | Metal Case |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 3.125 in |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Seal Width | 0.375 in |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Pressure | 10 psi |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.375 in |
| Speed | 0.07 ft/min |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Construction | CRW1 |
| Weight | 0.108 LB |
| EAN or UPC | 85311025942 |
