Find a Service Center
- 2.375 in Shaft Diameter
- 3.125 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Case Design | Metal Case |
| Design | CRW1 |
| Lip Type | Single Lip |
| Seal Width | 0.375 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Seal Type | Oil |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Lubricant | Oil or Grease |
| Overall Width | 0.375 in |
| Solid | Yes |
| Construction | CRW1 |
| Housing Bore Dia. | 3.125 in |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 2.375 in |
| Lip Material | Nitrile Rubber (NBR) |
| Weight | 0.108 LB |
| EAN or UPC | 85311025942 |
