Find a Service Center
Alternate Products
- 4.5 in Shaft Diameter
- 5.501 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Case Design | Metal Case |
| Housing Bore Dia. | 5.501 in |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Nitrile Rubber (NBR) |
| Speed | 0.07 ft/min |
| Shaft Dia. | 4.5 in |
| Lip Style | Internal |
| Case Material | Steel |
| Seal Width | 0.375 in |
| Inch/Metric | Inch |
| Overall Width | 0.375 in |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Spring Type | Garter |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Bore Sealant | Bore Tite |
| Design | CRW1 |
| Weight | 0.258 LB |
| EAN or UPC | 85311035897 |
| NSN Number | 5330-00-435-8499 |
