Find a Service Center
Alternate Products
- 4.5 in Shaft Diameter
- 5.501 in Housing Bore
- 0.375 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Shaft Dia. | 4.5 in |
| Case Material | Steel |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Spring Material | Carbon Steel |
| Operating Temperature [Max] | 210 °F |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Lip Style | Internal |
| Spring Type | Garter |
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Case Design | Metal Case |
| Overall Width | 0.375 in |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 5.501 in |
| Seal Type | Oil |
| Seal Width | 0.375 in |
| Temperature Range [Min] | -65 °F |
| Weight | 0.258 LB |
| EAN or UPC | 85311035897 |
| NSN Number | 5330-00-435-8499 |
