Find a Service Center
Alternate Products
- 4.938 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lip Style | Internal |
| Spring Type | Garter |
| Operating Temperature [Max] | 210 °F |
| Seal Width | 0.5 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Temperature Range [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Construction | CRWH1 |
| Housing Bore Dia. | 6.25 in |
| Overall Width | 0.5 in |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRWH1 |
| Case Material | Steel |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/Inner Case |
| Bore Sealant | Bore Tite |
| Inch/Metric | Inch |
| Shaft Dia. | 4.938 in |
| Solid | Yes |
| Spring Material | Carbon Steel |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Case Design | Metal Case, Inner Case |
| Weight | 0.523 LB |
| EAN or UPC | 85311037228 |
| NSN Number | 5330-01-363-0276 |
