Find a Service Center
Alternate Products
- 4.938 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Type | Oil |
| Design | CRWH1 |
| Seal Design | SKF Wave |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -40 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Case Design | Metal Case, Inner Case |
| Solid | Yes |
| Lip Type | Single Lip |
| Overall Width | 0.5 in |
| Housing Bore Dia. | 6.25 in |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 4.938 in |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 3,600 ft/min |
| Seal Width | 0.5 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Seal Application | General Purpose |
| Pressure | 10 psi |
| Construction | CRWH1 |
| Case Material | Steel |
| Weight | 0.523 LB |
| EAN or UPC | 85311037228 |
| NSN Number | 5330-01-363-0276 |
