Find a Service Center
Alternate Products
- 5 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Shaft Dia. | 5 in |
| Lip Type | Single Lip |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Type | Oil |
| Construction | CRWH1 |
| Lip Style | Internal |
| Housing Bore Dia. | 6.25 in |
| Case Construction | Steel Case w/Inner Case |
| Speed | 0.07 ft/min |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Design | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Overall Width | 0.5 in |
| Operating Temperature [Max] | 210 °F |
| Seal Width | 0.5 in |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 225 °F |
| Weight | 0.51 LB |
| EAN or UPC | 85311037334 |
