Find a Service Center
Alternate Products
- 5 in Shaft Diameter
- 6.25 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Solid | Yes |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/Inner Case |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Housing Bore Dia. | 6.25 in |
| Seal Width | 0.5 in |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.5 in |
| Temperature Range [Min] | -40 °F |
| Construction | CRWH1 |
| Shaft Dia. | 5 in |
| Lip Style | Internal |
| Case Design | Metal Case, Inner Case |
| Seal Application | General Purpose |
| Design | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Lubricant | Oil or Grease |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Max] | 225 °F |
| Weight | 0.51 LB |
| EAN or UPC | 85311037334 |
