Find a Service Center
Alternate Products
- 5.5 in Shaft Diameter
- 6.5 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Width | 0.5 in |
| Case Construction | Steel Case w/Inner Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Lip Type | Single Lip |
| Shaft Dia. | 5.5 in |
| Lip Style | Internal |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Seal Type | Oil |
| Construction | CRWH1 |
| Housing Bore Dia. | 6.5 in |
| Seal Design | SKF Wave |
| Design | CRWH1 |
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Case Design | Metal Case, Inner Case |
| Spring Material | Carbon Steel |
| Surface Speed [Nom] | 3,600 ft/min |
| Lubricant | Oil or Grease |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.5 in |
| Temperature Range [Max] | 225 °F |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Pressure | 10 psi |
| Weight | 0.473 LB |
| EAN or UPC | 85311038096 |
| NSN Number | 5330-00-920-6811 |
