Find a Service Center
Alternate Products
- 5.5 in Shaft Diameter
- 6.5 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Material | Steel |
| Inch/Metric | Inch |
| Overall Width | 0.5 in |
| Temperature Range [Min] | -40 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Seal Design | SKF Wave |
| Installation | Housing Press Fit |
| Surface Speed [Nom] | 3,600 ft/min |
| Spring Material | Carbon Steel |
| Seal Width | 0.5 in |
| Bore Sealant | Bore Tite |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Construction | CRWH1 |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Case Construction | Steel Case w/Inner Case |
| Spring Type | Garter |
| Design | CRWH1 |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Shaft Dia. | 5.5 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Housing Bore Dia. | 6.5 in |
| Case Design | Metal Case, Inner Case |
| Temperature Range [Max] | 225 °F |
| Weight | 0.473 LB |
| EAN or UPC | 85311038096 |
| NSN Number | 5330-00-920-6811 |
