Find a Service Center
Alternate Products
- 5.625 in Shaft Diameter
- 6.625 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Installation | Housing Press Fit |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Seal Type | Oil |
| Design | CRWH1 |
| Housing Bore Dia. | 6.625 in |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Construction | CRWH1 |
| Operating Temperature [Max] | 210 °F |
| Seal Width | 0.5 in |
| Lubricant | Oil or Grease |
| Spring Type | Garter |
| Overall Width | 0.5 in |
| Temperature Range [Max] | 225 °F |
| Case Material | Steel |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Shaft Dia. | 5.625 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Bore Sealant | Bore Tite |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Temperature Range [Min] | -40 °F |
| Solid | Yes |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/Inner Case |
| Case Design | Metal Case, Inner Case |
| Weight | 0.52 LB |
| EAN or UPC | 85311038355 |
| NSN Number | 5330-00-017-6102 |
