Find a Service Center
Alternate Products
- 5.625 in Shaft Diameter
- 6.625 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Case Design | Metal Case, Inner Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Type | Oil |
| Solid | Yes |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Case Material | Steel |
| Overall Width | 0.5 in |
| Seal Design | SKF Wave |
| Seal Width | 0.5 in |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -40 °F |
| Spring Type | Garter |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/Inner Case |
| Construction | CRWH1 |
| Bore Sealant | Bore Tite |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRWH1 |
| Lip Type | Single Lip |
| Housing Bore Dia. | 6.625 in |
| Shaft Dia. | 5.625 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.52 LB |
| EAN or UPC | 85311038355 |
| NSN Number | 5330-00-017-6102 |
