Find a Service Center
- 0.75 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Solid | Yes |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Spring Type | Garter |
| Housing Bore Dia. | 1.499 in |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 884 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Temperature Range [Max] | 225 °F |
| Spring Material | Carbon Steel |
| Lip Material | Nitrile Rubber (NBR) |
| Overall Width | 0.25 in |
| Seal Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 0.75 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Material | Steel |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Design | CRW1 |
| Lip Type | Single Lip |
| Lip Style | Internal |
| Weight | 0.027 LB |
| EAN or UPC | 85311005876 |
