Find a Service Center
- 0.75 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Width | 0.25 in |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 1.499 in |
| Surface Speed [Nom] | 884 ft/min |
| Inch/Metric | Inch |
| Seal Application | General Purpose |
| Case Material | Steel |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.25 in |
| Seal Design | SKF Wave |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Spring Type | Garter |
| Seal Type | Oil |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Solid | Yes |
| Shaft Dia. | 0.75 in |
| Construction | CRW1 |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Case Design | Metal Case |
| Speed | 0.07 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.027 LB |
| EAN or UPC | 85311005876 |
