Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Seal Width | 0.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Solid | Yes |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Shaft Dia. | 1 in |
| Lip Type | Single Lip |
| Overall Width | 0.25 in |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 210 °F |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Lip Material | Nitrile Rubber (NBR) |
| Case Design | Metal Case |
| Surface Speed [Nom] | 1,179 ft/min |
| Seal Type | Oil |
| Housing Bore Dia. | 1.499 in |
| Operating Temperature [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Weight | 0.031 LB |
| EAN or UPC | 85311008181 |
