Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Max] | 210 °F |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Housing Bore Dia. | 1.499 in |
| Case Design | Metal Case |
| Design | CRW1 |
| Installation | Housing Press Fit |
| Lip Material | Nitrile Rubber (NBR) |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.25 in |
| Seal Design | SKF Wave |
| Seal Type | Oil |
| Construction | CRW1 |
| Shaft Dia. | 1 in |
| Seal Width | 0.25 in |
| Lip Type | Single Lip |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Surface Speed [Nom] | 1,179 ft/min |
| Weight | 0.031 LB |
| EAN or UPC | 85311008181 |
