Find a Service Center
Alternate Products
MRC Bearing Service
7205PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102142802
- 0.984 in Inner Diameter
- 2.047 in Outer Diameter
- Single Row
- 0.591 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- 40 degree contact angle for heavy thrust load capacity
| Snap Ring | No Snap Ring |
| Bore Type | Round Bore |
| Closure Type | Open |
| Inner Ring Width | 15 mm |
| Fillet Radius Cone | 0.039 in, 0.99 mm |
| Dynamic Load Rating | 3750 lbf |
| Cage Material | Brass/Bronze |
| Relubricatable | No |
| Overall Width | 0.591 in, 15 mm |
| Capacity | Standard Capacity |
| Contact Angle | 40° |
| Outer Ring Width | 15 mm |
| O.D. | 52 mm |
| Precision Level | Standard (ABEC 1) |
| Universally (Flush) Ground | Yes |
| Rows of Balls | Single |
| Seal Type | Unsealed |
| Bearing Material | Steel |
| Cage Type | Metal |
| Material | Steel |
| icNumber | 7695884 |
| Precision Class | ISO P0 |
| Lubricant | Oil Preservative |
| O.D. Type | Straight |
| Enclosure | Open |
| Bearing Type | Angular Contact |
| Seal Material | None |
| Filling Slot | No |
| Radial Internal Clearance | C3 |
| Rolling Element | Ball |
| Origin | Single Row Angular Contact |
| Locking Device | No Locking Device |
| Inch/Metric | Metric Bore |
| No. of Rows | 1 |
| Fillet Radius | 0.039 in |
| I.D. | 25 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Rolling Element Material | Steel |
| Preload Level | None |
| No. in Set | Single Bearing |
| Internal Design | Universal Mounting |
| Ball Material | Steel |
| Static Load Rating [Max] | 2120 lbf |
| Precision | Standard |
| Weight | 0.29 LB |
| EAN or UPC | 87796198944 |
