MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Static Load Rating
10.2 kN
Rolling Element
Ball
Snap Ring
No Snap Ring
Internal Design
Universal Mounting
Inner Ring Width
0.59 in, 15 mm
Seal Material
None
No. of Rows
Single
Dynamic Load Rating
15.6 kN
Element Material
Bearing Steel
Origin
Single Row Angular Contact
Bearing Type
Unmounted, Angular Contact
Material
Bearing Steel
Enclosure
Open
No. in Set
Single Bearing
Lubricant
Oil Preservative
I.D.
0.98 in, 25 mm
Fillet Radius
0.024 in
Flush Ground
Yes
No. of Bearings
1
O.D.
2.05 in, 52 mm
Static Load Rating [Max]
4590 lbf
Temperature Range [Max]
450 °F
Inch/Metric
Metric
Precision Level
Standard (ABEC 1)
Duplex Type
Single
icNumber
7695884
Radial Internal Clearance Specification
Normal Clearance
Series
7200PJ
O.D. Type
Cylindrical
Outer Ring Width
0.59 in, 15 mm
Locking Device
No Locking Device
Cage Type
Metal
Contact Angle
40 Degree
Seal Type
Unsealed
Cage
Sheet Metal
Ring Type
Solid Inner Ring and Solid Outer Ring
Width
0.59 in, 15 mm
Precision
Standard
Ball Material
Steel
Bearing Class
Class 6 / P6
Radial Internal Clearance
Normal
Row Type
1
Precision Rating
ABEC 3
Preload Level
Light
Bore Type
Cylindrical
Cage Material
Brass
Rows of Balls
Single
Capacity
Standard Capacity
Weight
0.311 LB
EAN or UPC
97741016353
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
