Find a Service Center
Alternate Products
MRC Bearing Service
7205PJDU
Single Row Cylindrical Bore Angular Contact Ball Bearing
Item #102142802
- 0.984 in Inner Diameter
- 2.047 in Outer Diameter
- Single Row
- 0.591 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
features
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- 40 degree contact angle for heavy thrust load capacity
| Universally (Flush) Ground | Yes |
| Radial Internal Clearance | C3 |
| Origin | Single Row Angular Contact |
| Bearing Type | Angular Contact |
| Internal Design | Universal Mounting |
| Overall Width | 0.591 in, 15 mm |
| Outer Ring Width | 15 mm |
| Capacity | Standard Capacity |
| Closure Type | Open |
| O.D. Type | Straight |
| Inch/Metric | Metric Bore |
| Static Load Rating [Max] | 2120 lbf |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 40° |
| O.D. | 52 mm |
| Bearing Material | Steel |
| Fillet Radius | 0.039 in |
| Bore Type | Round Bore |
| Material | Steel |
| Fillet Radius Cone | 0.039 in, 0.99 mm |
| Precision | Standard |
| Ball Material | Steel |
| Rolling Element | Ball |
| Rows of Balls | Single |
| Seal Material | None |
| No. of Rows | 1 |
| Snap Ring | No Snap Ring |
| Lubricant | Oil Preservative |
| Seal Type | Unsealed |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inner Ring Width | 15 mm |
| No. in Set | Single Bearing |
| I.D. | 25 mm |
| Enclosure | Open |
| Dynamic Load Rating | 3750 lbf |
| icNumber | 7695884 |
| Relubricatable | No |
| Preload Level | None |
| Precision Class | ISO P0 |
| Cage Material | Brass/Bronze |
| Filling Slot | No |
| Rolling Element Material | Steel |
| Locking Device | No Locking Device |
| Weight | 0.29 LB |
| EAN or UPC | 87796198944 |
