Find a Service Center
Alternate Products
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Spacing | 5 3/8 in |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Base Width | 1 7/8 in |
| Collar No. | S1108KT |
| Dynamic Load Rating | 8150 lbf |
| Inch/Metric | Inch Bore |
| Overall Width | 2 5/16 in |
| Bolt Hole Width | 9/16 in |
| Housing Material | Polymer |
| Housing Construction | 1 Piece |
| Pillow Block Type | Thru-Bolt |
| Housing Height | 3 15/16 in |
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bearing Design | Non-Expansion |
| Bearing Insert | G1108KRRB TDCF |
| Bolt | 1/2 in |
| Base Height | 3/4 in |
| Temperature Range [Max] | 250 °F |
| Seal Type | Contact Seals |
| Outer Ring Size | 208 |
| Shaft Dia. | 1.5 in |
| Series | RAK Series |
| Length Through Bore | 1.6875 in |
| Lubrication | Relubricatable |
| Base Length | 7 1/16 in |
| Collar O.D. | 2 3/8 in |
| Bolt Hole Length | 1 1/32 in |
| Static Load Rating [Max] | 4400 lbf |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
![HACCP Friendly]()
HACCP Friendly
