Find a Service Center
Alternate Products
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Spacing | 5 3/8 in |
| Housing Material | Polymer |
| Seal Type | Contact Seals |
| Shaft Dia. | 1.5 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Insert | G1108KRRB TDCF |
| Series | RAS Series |
| Base Height | 3/4 in |
| Bearing Type | Ball Bearing |
| Base Length | 7 1/16 in |
| Lubrication | Relubricatable |
| Bolt Hole Width | 9/16 in |
| Bolt | 1/2 in |
| Base Width | 1 7/8 in |
| Outer Ring Size | 208 |
| Temperature Range [Max] | 250 °F |
| Pillow Block Type | Thru-Bolt |
| Housing Construction | 1 Piece |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Height | 3 15/16 in |
| Collar O.D. | 2 3/8 in |
| Bearing Design | Non-Expansion |
| Length Through Bore | 1.6875 in |
| Overall Width | 2 5/16 in |
| Bolt Hole Length | 1 1/32 in |
| Static Load Rating [Max] | 4400 lbf |
| Inch/Metric | Inch Bore |
| Bolt Holes | 2 |
| End Type | Open End |
| Dynamic Load Rating | 8150 lbf |
| Weight | 2.22 LB |
| EAN or UPC | 87796189065 |
-
![HACCP Friendly]()
HACCP Friendly
