Find a Service Center
- 1.5" Shaft, 1.9375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Housing Height | 3 15/16 in |
| Bearing Insert | G1108KRRB TDCF |
| Overall Width | 2 5/16 in |
| Collar O.D. | 2 3/8 in |
| Base Length | 7 1/16 in |
| Bolt Hole Length | 1 1/32 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Housing Construction | 1 Piece |
| Collar No. | S1108KT |
| Housing Material | Polymer |
| Seal Type | Contact Seals |
| Bearing Design | Non-Expansion |
| Temperature Range [Max] | 250 °F |
| Locking Device | Eccentric Locking Collar |
| Outer Ring Size | 208 |
| End Type | Open End |
| Pillow Block Type | Thru-Bolt |
| Bolt | 1/2 in |
| Inch/Metric | Inch Bore |
| Bolt Holes | 2 |
| Length Through Bore | 1.6875 in |
| Series | RAK Series |
| Bolt Hole Spacing | 5 3/8 in |
| Base Width | 1 7/8 in |
| Shaft Dia. | 1.5 in |
| Dynamic Load Rating | 8150 lbf |
| Base Height | 3/4 in |
| Static Load Rating [Max] | 4400 lbf |
| Bearing Type | Ball Bearing |
| Bolt Hole Width | 9/16 in |
| Weight | 2.666 LB |
| EAN or UPC | 87796180116 |
-
![HACCP Friendly]()
HACCP Friendly
