Find a Service Center
Alternate Products
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Insert Type | Steel Insert |
| Housing Construction | 1 Piece |
| Base Width | 4 in |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| Shaft Dia. | 2.4375 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Locking Device | Eccentric Locking Collar |
| Base Height | 1 1/2 in |
| Bearing Insert | GN207KRRB |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Width | 7/8 in |
| Base Length | 13 3/4 in |
| End Type | Open End |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 11 1/4 in |
| Bolt Hole Length | 1 3/8 in |
| Inch/Metric | Inch Bore |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Heavy-Duty |
| Collar No. | SN207K |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
