Find a Service Center
- 24 Diametral Pitch
- 14.5⁰ Pressure Angle
- 120 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Torque at 600 RPM | 84.3 lb/in |
| Material | Steel |
| Set Screw | N/A |
| Hub Dia. | 2.25 in |
| Torque at 300 RPM | 118 lb/in |
| Rated Torque [Max] | 84.3 @ 600 rpm |
| O.D. | 5.08 in |
| Keyway | N/A |
| Bore Size | 0.500 in |
| Pitch Dia. | 5 in |
| Diametral Pitch | 24 |
| Bore Type | Bored to Size |
| Pitch Diameter | 5 in |
| Hub Projection | 1/2 in |
| Torque at 200 RPM | 135 lb/in |
| Torque at 1800 RPM | N/A |
| Pressure Angle | 14 1/2 degrees |
| Face Width | 0.25 in |
| Torque at 1200 RPM | 56.4 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeths | 120 |
| Outside Dia. | 5.08 in |
| Set Screw Size | N/A |
| Type | A |
| Origin | Finished Bore |
| No. of Teeth | 120 |
| Length Through Bore | 0.750 in |
| Bore Dia. | 0.5 in |
| Outside Dia. [Min] | 5.08 in |
| Torque at 900 RPM | 65.7 lb/in |
| Weight | 1.501 LB |
| EAN or UPC | 781711096260 |
