Find a Service Center
Alternate Products
- 16 Diametral Pitch
- 14.5⁰ Pressure Angle
- 40 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Torque at 900 RPM | 134 lb/in |
| Origin | Reborable |
| Hub Dia. | 1.69 in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Diameter | 2.5 in |
| Set Screw Size | N/A |
| Set Screw | N/A |
| Bore Type | Minimum Plain Bore |
| Torque at 200 RPM | 217 lb/in |
| Torque at 1200 RPM | 115 lb/in |
| Torque at 1800 RPM | 89.4 lb/in |
| Pitch Dia. | 2.5 in |
| Length Through Bore | 1.000 in |
| No. of Teeth | 40 |
| Pressure Angle | 14 1/2 degrees |
| No. of Teeths | 40 |
| Torque at 300 RPM | 200 lb/in |
| Type | A |
| Diametral Pitch | 16 |
| Hub Projection | 1/2 in |
| Keyway | N/A |
| Material | Steel |
| Bore Dia. | 0.5 in |
| Outside Dia. [Min] | 2.625 in |
| Bore Size | 0.500 in |
| O.D. | 2.63 in |
| Face Width | 0.5 in |
| Outside Dia. | 2.625 in |
| Rated Torque [Max] | 115 @ 1200 rpm |
| Torque at 600 RPM | 160 lb/in |
| Weight | 0.941 LB |
| EAN or UPC | 781711102442 |
