Find a Service Center
Alternate Products
- Reborable Steel Gear
- 12 Diametral Pitch
- 14.5° Pressure Angle
- 11 Teeth
- 1" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Four ball wear test 40 kg: 63 mm
- More cost effective, quieter running and metallic options
| Hub Dia. | 3/4 in |
| Type | A |
| Pitch Diameter | 1 in |
| Keyway | w/o Keyway, w/o Setscrew |
| No. of Teeth | 11 |
| Length Through Bore | 1.250 in |
| Material | Steel |
| Torque at 900 RPM | 88.6 lb/in |
| Origin | Reborable |
| Outside Dia. | 1.17 in |
| Diametral Pitch | 12 |
| Torque at 300 RPM | 108 lb/in |
| Outside Dia. [Min] | 1.17 in |
| Pressure Angle | 14 1/2 degrees |
| Torque at 600 RPM | 97 lb/in |
| Bore Type | Minimum Plain Bore |
| Torque at 200 RPM | 112 lb/in |
| Torque at 1800 RPM | 70 lb/in |
| Torque at 1200 RPM | 81.5 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size | 0.500 in |
| Set Screw | No |
| Weight | 0.161 LB |
| EAN or UPC | 781711097441 |
