Find a Service Center
Alternate Products
- Reborable Steel Gear
- 8 Diametral Pitch
- 14.5° Pressure Angle
- 11 Teeth
- 1 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
| Torque at 300 RPM | 383 lb/in |
| Torque at 200 RPM | 404 lb/in |
| Outside Dia. | 1.75 in |
| Length Through Bore | 2.000 in |
| Set Screw | No |
| Diametral Pitch | 8 |
| Pressure Angle | 14 1/2 degrees |
| Torque at 900 RPM | 294 lb/in |
| Origin | Reborable |
| No. of Teeth | 11 |
| Type | A |
| Outside Dia. [Min] | 1.75 in |
| Torque at 1800 RPM | 217 lb/in |
| Hub Dia. | 1.13 in |
| Torque at 600 RPM | 332 lb/in |
| Material | Steel |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size | 0.750 in |
| Torque at 1200 RPM | 263 lb/in |
| Pitch Diameter | 1.5 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Bore Type | Minimum Plain Bore |
| Weight | 0.801 LB |
| EAN or UPC | 781711098066 |
