Find a Service Center
Alternate Products
- Reborable Steel Gear
- 8 Diametral Pitch
- 14.5° Pressure Angle
- 20 Teeth
- 2 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Type | A |
| Diametral Pitch | 8 |
| Torque at 900 RPM | 557 lb/in |
| Keyway | w/o Keyway, w/o Setscrew |
| Bore Size | 0.875 in |
| Outside Dia. | 2.75 in |
| Torque at 1800 RPM | 372 lb/in |
| Origin | Reborable |
| Torque at 200 RPM | 907 lb/in |
| Length Through Bore | 2.000 in |
| Material | Steel |
| No. of Teeth | 20 |
| Pitch Diameter | 2.5 in |
| Hub Dia. | 2.05 in |
| Set Screw | No |
| Pressure Angle | 14 1/2 degrees |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. [Min] | 2.75 in |
| Bore Type | Minimum Plain Bore |
| Torque at 1200 RPM | 478 lb/in |
| Torque at 300 RPM | 832 lb/in |
| Torque at 600 RPM | 667 lb/in |
| Weight | 2.101 LB |
| EAN or UPC | 781711098189 |
