Find a Service Center
Alternate Products
- 6 Diametral Pitch
- 14.5⁰ Pressure Angle
- 14 Teeths
- Steel Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
features
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
| Torque at 300 RPM | 1053 lb/in |
| Set Screw Size | 1 1/8 |
| Torque at 1200 RPM | 618 lb/in |
| Diametral Pitch | 6 |
| Torque at 600 RPM | 853 lb/in |
| Pressure Angle | 14 1/2 degrees |
| Outside Dia. | 2.67 in |
| Rated Torque [Max] | 618 @ 1200 rpm |
| No. of Teeth | 14 |
| Outside Dia. [Min] | 2.67 in |
| Hub Dia. | 1.78 in |
| Bore Dia. | 1.125 in |
| Torque at 200 RPM | 1142 lb/in |
| Pitch Diameter | 2.333 in |
| Hardened Teeth | Without Hardened Teeth |
| Pitch Dia. | 2.333 in |
| Keyway | With Keyway |
| Torque at 1800 RPM | 485 lb/in |
| Face Width | 1.5 in |
| Type | A |
| Bore Type | Bored to Size |
| Material | Steel |
| O.D. | 2.67 in |
| Set Screw | Yes |
| Length Through Bore | 2.375 in |
| Origin | Finished Bore |
| Bore Size | 1.125 in |
| Torque at 900 RPM | 717 lb/in |
| No. of Teeths | 14 |
| Weight | 1.901 LB |
| EAN or UPC | 781711461112 |
