Find a Service Center
Alternate Products
- Finished Steel Gear
- 16 Diametral Pitch
- 20.0° Pressure Angle
- 15 Teeth
- 15/16" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
| Set Screw | Yes |
| Torque at 300 RPM | 113 lb/in |
| Torque at 1200 RPM | 85.2 lb/in |
| Type | A |
| Diametral Pitch | 16 |
| Keyway | w/Setscrew |
| Outside Dia. | 1.0625 in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 1800 RPM | 73.1 lb/in |
| Bore Size | 0.375 in |
| Material | Steel |
| Hub Dia. | 3/4 in |
| Outside Dia. [Min] | 1.0625 in |
| Length Through Bore | 1.250 in |
| No. of Teeth | 15 |
| Pressure Angle | 20 degrees |
| Pitch Diameter | 0.9375 in |
| Origin | Finished Bore |
| Torque at 900 RPM | 92.8 lb/in |
| Torque at 600 RPM | 102 lb/in |
| Bore Type | Bored to Size |
| Torque at 200 RPM | 117 lb/in |
| Set Screw Size | 3/8 |
| Weight | 4.601 LB |
| EAN or UPC | 781711459911 |
