Find a Service Center
Alternate Products
- Finished Steel Gear
- 16 Diametral Pitch
- 20.0° Pressure Angle
- 30 Teeth
- 1 7/8" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Reliability from steel, cast iron and brass
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
| Length Through Bore | 1.250 in |
| Material | Steel |
| Keyway | w/Setscrew |
| Bore Type | Bored to Size |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 1.56 in |
| Outside Dia. | 2 in |
| Torque at 200 RPM | 270 lb/in |
| Set Screw | Yes |
| Torque at 900 RPM | 181 lb/in |
| Torque at 1200 RPM | 159 lb/in |
| Pressure Angle | 20 degrees |
| No. of Teeth | 30 |
| Torque at 1800 RPM | 127 lb/in |
| Diametral Pitch | 16 |
| Set Screw Size | 3/4 |
| Torque at 600 RPM | 211 lb/in |
| Torque at 300 RPM | 253 lb/in |
| Pitch Diameter | 1.875 in |
| Outside Dia. [Min] | 2 in |
| Type | A |
| Origin | Finished Bore |
| Bore Size | 0.750 in |
| Weight | 0.831 LB |
| EAN or UPC | 781711461525 |
