Find a Service Center
Alternate Products
- Finished Steel Gear
- 16 Diametral Pitch
- 20.0° Pressure Angle
- 32 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Reliability from steel, cast iron and brass
- Four ball wear test 40 kg: 63 mm
| Diametral Pitch | 16 |
| No. of Teeth | 32 |
| Material | Steel |
| Torque at 1800 RPM | 135 lb/in |
| Set Screw | Yes |
| Torque at 300 RPM | 275 lb/in |
| Pitch Diameter | 2 in |
| Torque at 900 RPM | 195 lb/in |
| Outside Dia. [Min] | 2.125 in |
| Set Screw Size | 5/8 |
| Keyway | w/Setscrew |
| Hub Dia. | 1.69 in |
| Type | A |
| Bore Size | 0.625 in |
| Outside Dia. | 2.125 in |
| Torque at 200 RPM | 296 lb/in |
| Bore Type | Bored to Size |
| Length Through Bore | 1.250 in |
| Torque at 1200 RPM | 170 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Origin | Finished Bore |
| Pressure Angle | 20 degrees |
| Torque at 600 RPM | 228 lb/in |
| Weight | 0.901 LB |
| EAN or UPC | 781711461549 |
