Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 2.062 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Housing Bore Dia. | 2.062 in |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Design | Metal Case |
| Lip Type | Single Lip |
| Construction | CRW1 |
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Width | 0.25 in |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 1,179 ft/min |
| Overall Width | 0.25 in |
| Design | CRW1 |
| Solid | Yes |
| Seal Design | SKF Wave |
| Shaft Dia. | 1 in |
| Seal Type | Oil |
| Pressure | 10 psi |
| Weight | 0.068 LB |
| EAN or UPC | 85311008655 |
