Find a Service Center
Alternate Products
- 1 in Shaft Diameter
- 2.44 in Housing Bore Diameter
- 0.38 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- Inch
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Speed | 0.05 ft/min |
| Construction | HMSA7 |
| Shaft Dia. | 1 in, 25.4 mm |
| Seal Design | Molded Design |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Type | Garter |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Case Material | Rubber-Covered Steel |
| Lip Type | Dual Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Style | Internal |
| Solid | Yes |
| Lubricant | Oil or Grease |
| Case Construction | Rubber Covered Steel Case |
| Seal Application | Light Dirt Exclusion |
| Overall Width | 0.38 in, 9.53 mm |
| Spring Material | Carbon Steel |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Inch |
| Housing Bore Dia. | 2.44 in, 62 mm |
| Seal Width | 3/8 in |
| Design | HMSA7 |
| Case Design | Rubber Outside Diameter |
| Pressure | 7 psi |
| Weight | 0.113 LB |
| EAN or UPC | 85311008716 |
