Find a Service Center
Alternate Products
- 1.063 in Shaft Diameter
- 1.624 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Shaft Dia. | 1.063 in |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.25 in |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 1.624 in |
| Lip Type | Single Lip |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Seal Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/o Inner Case |
| Seal Application | General Purpose |
| Weight | 0.031 LB |
| EAN or UPC | 85311008877 |
