Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.624 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Solid | Yes |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel Garter |
| Case Design | Metal Case |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 1.624 in |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Surface Speed [Nom] | 1,326 ft/min |
| Shaft Dia. | 1.125 in |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Seal Width | 0.25 in |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Family Name | Single Lip With Spring Shaft Seal |
| Overall Width | 0.25 in |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Weight | 0.039 LB |
| EAN or UPC | 85311009478 |
