Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 2.062 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Width | 0.313 in |
| Housing Bore Dia. | 2.062 in |
| Shaft Dia. | 1.125 in |
| Case Design | Metal Case |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Lip Style | Internal |
| Operating Temperature [Max] | 210 °F |
| Bore Sealant | Bore Tite |
| Case Construction | Steel Case w/o Inner Case |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Inch/Metric | Inch |
| Overall Width | 0.313 in |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Speed | 0.07 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Construction | CRW1 |
| Temperature Range [Max] | 225 °F |
| Seal Design | SKF Wave |
| Lip Material | Nitrile Rubber (NBR) |
| Case Material | Steel |
| Design | CRW1 |
| Spring Material | Carbon Steel |
| Installation | Housing Press Fit |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Weight | 0.088 LB |
| EAN or UPC | 85311009843 |
