Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 2.062 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Width | 0.313 in |
| Installation | Housing Press Fit |
| Temperature Range [Max] | 225 °F |
| Lip Type | Single Lip |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Case Design | Metal Case |
| Seal Design | SKF Wave |
| Spring Type | Garter |
| Overall Width | 0.313 in |
| Pressure | 10 psi |
| Shaft Dia. | 1.125 in |
| Inch/Metric | Inch |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 2.062 in |
| Seal Type | Oil |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Case Material | Steel |
| Family Name | Single Lip With Spring Shaft Seal |
| Bore Sealant | Bore Tite |
| Temperature Range [Min] | -65 °F |
| Construction | CRW1 |
| Weight | 0.088 LB |
| EAN or UPC | 85311009843 |
