Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 2.441 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Seal Width | 0.25 in |
| Case Design | Metal Case |
| Housing Bore Dia. | 2.441 in |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel Garter |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Shaft Dia. | 1.125 in |
| Seal Application | General Purpose |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Type | Oil |
| Cover/Compensation Ring/Plate Required | No |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Max] | 210 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Temperature Range [Max] | 225 °F |
| Construction | CRW1 |
| Design | CRW1 |
| Lip Style | Internal |
| Solid | Yes |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Weight | 0.091 LB |
| EAN or UPC | 85311009911 |
